Festool Circ Saw and Guide Rail System Delmar NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Delmar.

Local Companies

Scotia Storage Co
(518) 382-0218
109 Freemans Bridge Rd
Scotia, NY
Side by Side Storage
(518) 584-3604
1524 Crane Street
Schenectady, NY
Harmony Mills Self Storage
(518) 237-5000
100 N Mohawk St
Cohoes, NY
J N K Machine
(716) 664-5900
1611 Foote Avenue Ext
Jamestown, NY
American Global Co
(718) 729-7500
4305 35th St
Long Island City, NY
Brunswick Self Storage
(518) 279-4501
42 Brick Church Rd
Troy, NY
Albany Self Storage
(518) 489-5530
1025 Central Ave Ste 3
Albany, NY
Bentley Self Storage
(518) 465-1900
721 River Rd
Glenmont, NY
H & C Tool Supply Co
(315) 457-6262
209 2nd St
Liverpool, NY
J & S Gutter Cleaning Inc
(631) 399-5177
59 Deer Ln
Manorville, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Delmar NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Home Improvement Tools Delmar NY
- Festool C12 Cordless Drill Delmar NY
- Heavy Lifters Delmar NY
- FAST Implementation Tips Delmar NY
- Forklift Operation Delmar NY
- Home Exterior Products Delmar NY
- Hand-Held Power Saws Delmar NY
- Drape Wall and Cloak Wall Delmar NY
- Festool Joining System Delmar NY