Festool Circ Saw and Guide Rail System Cortland NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Cortland.

Local Companies

Ferro J D Roofing Co
(607) 273-0872
390 State Route 13
Cortland, NY
Niagara Cutter Inc
(716) 689-8400
200 John James Audubon P
Buffalo, NY
May May Nail Salon
(315) 622-8182
8182 Oswego Rd
Liverpool, NY
Simons Gary R
(315) 487-8993
6713 Winchell Rd
Warners, NY
New York Ladder & Scaffolding Corporation
(914) 423-2960
122 Woodworth Ave
Yonkers, NY
Secure Self Storage - Ithaca
(607) 216-4679
35 Royal Rd
Ithaca, NY
Ferro Jd Roofing
(607) 753-9949
390 State Route 13
Cortland, NY
Car Engineering & Mfg
(585) 924-6400
51 Victor Heights Pkwy
Victor, NY
Dolan William Roofing Co Inc
(718) 968-3095
2324 E 63rd St
Brooklyn, NY
Gas & Elec Svce Co
(914) 592-7755
20 Brookdale Pl
Mount Vernon, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Heavy Lifters Cortland NY
Toyota Material Handling now offers a factory-installed compressed natural gas (CNG) fuel system on its 4,000- to 6,500-pound-capacity internal combustion (IC) cushion tire and 3,000- to 6,500-pound-capacity IC pneumatic lift truck models.
- Drape Wall and Cloak Wall Cortland NY
- Forklift Operation Cortland NY
- Festool C12 Cordless Drill Cortland NY
- Home Exterior Products Cortland NY
- Hand-Held Power Saws Cortland NY
- FAST Implementation Tips Cortland NY
- Festool Joining System Cortland NY
- Differences Between Green Globes and LEED Cortland NY
- Home Improvement Tools Cortland NY