Festool Circ Saw and Guide Rail System Copiague NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Copiague.

Local Companies

Safeguard Self Storage - Hewlett - Broadway
(516) 791-5051
1176 Broadway
Hewlett, NY
Safeguard Self Storage - Hollis
(718) 217-1799
204-02 Jamaica Ave
Hollis, NY
Space Self Storage - Amityville
(631) 617-6299
24 Sterling Pl
Amityville, NY
Space Self Storage - Lindenhurst
(631) 956-3200
101 E Hoffman Ave
Lindenhurst, NY
4 Storage Deer Park
(631) 667-7700
541 Acorn St
Deer Park, NY
Safeguard Self Storage - W Hempstead - Hempstead Turnpike
(516) 538-4511
45 Hempstead Turnpike
West Hempstead, NY
Lawrence - Storage Post
(516) 371-3990
640 Rockaway Turnpike
Cedarhurst, NY
Uncle Bob's Self Storage - Bay Shore
(800) 242-1715
110 Saxon Ave
Bay Shore, NY
Space Self Storage - Deer Park
(631) 940-8280
715 Grand Blvd
Deer Park, NY
A Space Place Storage - Melville
(877) 288-0454
2091 New Highway
Farmingdale, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Copiague NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Festool C12 Cordless Drill Copiague NY
- Forklift Operation Copiague NY
- Home Improvement Tools Copiague NY
- Home Exterior Products Copiague NY
- Drape Wall and Cloak Wall Copiague NY
- Hand-Held Power Saws Copiague NY
- Heavy Lifters Copiague NY
- Festool Joining System Copiague NY
- FAST Implementation Tips Copiague NY