Festool Circ Saw and Guide Rail System Canandaigua NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Canandaigua.

Local Companies

Tripodi Roofing & Gutter
(585) 396-0630
4028 State Route 5 and 20
Canandaigua, NY
Twin Shores Aluminum Co
(631) 493-0181
112 Daly Rd
East Northport, NY
Beyond 2000 Nail Inc
(212) 426-5566
1320 Madison Ave
New York, NY
Tci Industrial Supply
(631) 231-1515
390 Oser Ave
Hauppauge, NY
Brewer Seamless Gutter Service
(585) 554-6790
PO Box 129
Middlesex, NY
Evergreen Hills Self-Storage LLC
(585) 388-7550
3260 Evergreen Hills Dr
Macedon, NY
Jerry's Plumbing & Heating
(315) 635-3651
26 Virginia St
Baldwinsville, NY
Building Prods of Amer Corp
(212) 254-5555
636 Broadway
New York, NY
Superior Tool Co Inc
(716) 692-3900
1020 Oliver St
North Tonawanda, NY
Gus Chimney & Roofing
(718) 738-0041
1596 208th St
Bayside, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Canandaigua NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Home Exterior Products Canandaigua NY
- Hand-Held Power Saws Canandaigua NY
- Drape Wall and Cloak Wall Canandaigua NY
- Home Improvement Tools Canandaigua NY
- FAST Implementation Tips Canandaigua NY
- Forklift Operation Canandaigua NY
- Festool C12 Cordless Drill Canandaigua NY
- Heavy Lifters Canandaigua NY
- Festool Joining System Canandaigua NY