Festool Circ Saw and Guide Rail System Auburn NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Auburn.

Local Companies

Seibert H G
(315) 253-6833
229 S Hoopes Ave
Auburn, NY
Horseheads DO-It Center
(607) 796-4956
124 N Main St
Horseheads, NY
Richard Manno Co Inc
(631) 643-2200
42 Lamar St
West Babylon, NY
Supreme Aluminum
(845) 896-3763
20 Riverview Dr
Fishkill, NY
Thuro Metal Products Inc
(631) 435-0444
Grand Blvd
Brentwood, NY
Auburn Chain Saw & Mower Inc
(315) 252-0664
128 York St
Auburn, NY
Marietta Diesel Inc
(315) 253-5157
50 Chase Street Ext
Auburn, NY
Seamless Gutter & Supply Co
(607) 432-5636
2 Nebraska Ave
Endicott, NY
American Imperial Screw Corp
(845) 354-9100
245 Quaker Rd
Pomona, NY
Arrow Triboro Tool and Saw
(718) 726-4218
2614 Hoyt Ave S
Long Island City, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Festool C12 Cordless Drill Auburn NY
Festool C12 is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.
- Differences Between Green Globes and LEED Auburn NY
- Festool Joining System Auburn NY
- Drape Wall and Cloak Wall Auburn NY
- Forklift Operation Auburn NY
- Heavy Lifters Auburn NY
- Home Exterior Products Auburn NY
- Hand-Held Power Saws Auburn NY
- FAST Implementation Tips Auburn NY
- Home Improvement Tools Auburn NY