Festool C12 Cordless Drill Yonkers NY

Festool C12 in Yonkers is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Builders North Llc
201-758-8217
1207 Summit Ave
Union City, NJ
Jc General Construction.Inc
201 780 7379
712 26
Union City, NJ
NuLite Enterprises
(201) 507-1912
30 Park Avenue
Lyndhurst, NJ
Greendepot
(718) 782-2991
1 ivy hill way
Brooklyn, NY
Green Harmony Now, LLC
(973) 233-1106
P O BOX 550
Montclair, NJ
Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
Plus Wood Floors
203 4960134
33 23 147 Place
Flushing, NY
Environmental Risk
(212) 369-5400
309 East 90th St. , Suite 4
New York, NY
Suburban Green, LLC.
(877) 503-6374
23 Olney Road
Mahwah, NJ
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Yonkers NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Home Repair Tools Yonkers NY
- First Test: T-Drill T-35 Tee-Forming Tool Yonkers NY
- Hidden-Fastener Tool Yonkers NY
- Festool Circ Saw and Guide Rail System Yonkers NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details