Festool C12 Cordless Drill Webster NY

Festool C12 in Webster is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Better Built Homes, LLC
585-226-8574
Rochester, NY
Lopresti Homes Corp.
585-352-4472
Rochester, NY
Polidori & Ferri Custom Homes Inc.
585-924-9140
Rochester, NY
R J Taylor General Contractors, Inc.
585-248-6000
Rochester, NY
Spartan Homes Inc.
585-315-2270
Rochester, NY
Green Living™ Technologies (GLT)
800-631-8001
1151 Titus Avenue
Rochester, NY
Jen Mantione
585-305-2745
Rochester, NY
Mel Yost
585-682-5571
Rochester, NY
Prideland Custom Homes & Home Improvement, LLC
352-592-7750
Rochester, NY
Scottwood Builders
585-392-2332
Rochester, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- First Test: T-Drill T-35 Tee-Forming Tool Webster NY
A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.
- Hidden-Fastener Tool Webster NY
- Festool Joining System Webster NY
- Home Repair Tools Webster NY
- Festool Circ Saw and Guide Rail System Webster NY