Festool C12 Cordless Drill Uniondale NY

Festool C12 in Uniondale is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

D & E Properties Management And Services Llc
888-739-8741
234 North Brookside Avenue
Freeport, NY
Plus Wood Floors
203 4960134
33 23 147 Place
Flushing, NY
Mwanzi co.
(212) 551-3563
230 Park Avenue, Suite 1000
New York, NY
Build Green Inc.
(516) 902-7998
221 East 83rd Street, 2R
New York, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
DB CONSTRUCTION
(347) 365-8284
592 BUSHWICK AVE
Brooklyn, NY
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
Environmental Risk
(212) 369-5400
309 East 90th St. , Suite 4
New York, NY
Bio-Solar LLC
(347) 413-5035
234 Madison St
Brooklyn, NY
Greendepot
(718) 782-2991
1 ivy hill way
Brooklyn, NY
Data Provided by:
      

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Uniondale NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- First Test: T-Drill T-35 Tee-Forming Tool Uniondale NY
- Home Repair Tools Uniondale NY
- Festool Circ Saw and Guide Rail System Uniondale NY
- Hidden-Fastener Tool Uniondale NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details