Festool C12 Cordless Drill Tonawanda NY

Festool C12 in Tonawanda is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Hughesco Of Buffalo
716-691-HOME
140 Irwin Place
Amherst, NY
Habitat for Humanity - Lockport
716-433-5073
Buffalo, NY
MDs Renovations and Construction
716-912-6900
Buffalo, NY
Patrick Homes of WNY, Inc
716-689-1930
Buffalo, NY
Tesmer Builders, Inc.
716-689-8440
Buffalo, NY
Life Style Communities
P.O. Box 945
Hamburg, NY
C.M.K. Builders of Alden, Inc.
716-870-6016
Buffalo, NY
Marrano Marc Equity Corporation
716-675-1200
Buffalo, NY
MJ Peterson/Tucker Homes, LLC
716-689-0880
Buffalo, NY
Prestige Designs
716-626-0133
Buffalo, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Tonawanda NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Hidden-Fastener Tool Tonawanda NY
- First Test: T-Drill T-35 Tee-Forming Tool Tonawanda NY
- Festool Circ Saw and Guide Rail System Tonawanda NY
- Home Repair Tools Tonawanda NY