Festool C12 Cordless Drill Syracuse NY

Festool C12 in Syracuse is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

CBA East, Inc.
315-343-1182
Syracuse, NY
Harrington Homes
315-682-8751
Syracuse, NY
Robert Lloyd
315-343-6294
Syracuse, NY
Thunderbird Builders
315-374-4745
Syracuse, NY
McClurg Remodeling & Construction Services
315-673-2051
Syracuse, NY
McClurg Remodeling & Construction
60 East Main Street
Marcellus, NY
Degilormo Construction Co., Inc.
315-458-1800
Syracuse, NY
J P Morgan Construction Corp
315-682-4652
Syracuse, NY
Signature Crest Builders
315-461-9027
Syracuse, NY
Von Wettberg Builders
315-824-1191
Syracuse, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Syracuse NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Home Repair Tools Syracuse NY
- Festool Joining System Syracuse NY
- Hidden-Fastener Tool Syracuse NY
- First Test: T-Drill T-35 Tee-Forming Tool Syracuse NY