Festool C12 Cordless Drill South Richmond Hill NY

Festool C12 in South Richmond Hill is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
D & E Properties Management And Services Llc
888-739-8741
234 North Brookside Avenue
Freeport, NY
bistre inc
(201) 432-2500
46 halladay st
jersey city, NJ
David Bergman Architect
(212) 475-3106
241 Eldridge St. 3R
New York, NY
Bio-Solar LLC
(347) 413-5035
234 Madison St
Brooklyn, NY
DB CONSTRUCTION
(347) 365-8284
592 BUSHWICK AVE
Brooklyn, NY
Agl Construction Corp.
(201) 783-3799
528 Hudson Street
Hoboken, NJ
Plus Wood Floors
203 4960134
33 23 147 Place
Flushing, NY
NuLite Enterprises
(201) 507-1912
30 Park Avenue
Lyndhurst, NJ
Mwanzi co.
(212) 551-3563
230 Park Avenue, Suite 1000
New York, NY
Data Provided by:
      

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System South Richmond Hill NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- First Test: T-Drill T-35 Tee-Forming Tool South Richmond Hill NY
- Home Repair Tools South Richmond Hill NY
- Hidden-Fastener Tool South Richmond Hill NY
- Festool Circ Saw and Guide Rail System South Richmond Hill NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details