Festool C12 Cordless Drill Schenectady NY

Festool C12 in Schenectady is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Camelot Associates Corporation
518-347-2537
Albany, NY
Commission on Economic Opportunity
518-237-0583
Albany, NY
Norstar Development Company, USA, LLC
518-431-1051
Albany, NY
Saratoga Builders, LLC
518-587-2666
Albany, NY
Wellspring Building & Development Corporation
518-884-8585
Albany, NY
InsulationStop.com
(518) 867-9555
5 Floral Court
Latham, NY
Capital Construction, Inc.
518-587-4279
Albany, NY
Kodiak Construction, Inc.
518-587-4847
Albany, NY
Rosewood Homebuilders, LLC
518-783-4090
Albany, NY
T.P. Builders, Inc.
518-489-5133
Albany, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Schenectady NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- First Test: T-Drill T-35 Tee-Forming Tool Schenectady NY
- Hidden-Fastener Tool Schenectady NY
- Home Repair Tools Schenectady NY
- Festool Circ Saw and Guide Rail System Schenectady NY