Festool C12 Cordless Drill Saratoga Springs NY

Festool C12 in Saratoga Springs is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Blueline Construction
(518) 583-2801
26 Bensonhurst Ave
Saratoga Springs, NY
Galarneau Builders
(518) 587-8191
526 Maple Ave Ste 5
Saratoga Springs, NY
Capital Construction Incorporated
(518) 884-4555
81 South St
Ballston Spa, NY
Under the Sun Building and Remodeling, LLC
518-791-5353
Glens Falls, NY
Eric & Eric Construction
518-494-3611
Glens Falls, NY
21st Century Homes & Structures
518-532-7900
250 Excelsior Drive
Saratoga Springs, NY
Denali Construction Services
(518) 583-1960
14 Greenridge Pl
Saratoga Springs, NY
Bnc Construction Corporation
(518) 288-3346
831 State Route 67
Ballston Spa, NY
East River Builders, LLC
518-654-9559
Glens Falls, NY
Weidman Construction
518-798-3825
Glens Falls, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Saratoga Springs NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Festool Circ Saw and Guide Rail System Saratoga Springs NY
- Home Repair Tools Saratoga Springs NY
- First Test: T-Drill T-35 Tee-Forming Tool Saratoga Springs NY
- Hidden-Fastener Tool Saratoga Springs NY