Festool C12 Cordless Drill Rome NY

Festool C12 in Rome is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Boylan Marble & Terrazzo Restoration
315-363-3365
1816 W. Elm Street
Oneida, NY
Adorino Construction, Inc.
315-734-9771
Utica, NY
CK Doolittle Enterprises, Inc.
315-942-5891
Utica, NY
Kelly Construction
315-334-3486
Utica, NY
Thomas Rondeau Construction, Inc.
315-796-7147
Utica, NY
Scharf Mechanical Contractor
(315) 797-5840
319 South St
Utica, NY
Oneida Valley Abstract Corp.
(315) 363-1444
PO box 296
Wampsville, NY
Buck Construction, LLC
315-736-0865
Utica, NY
Jeff Petroski & Sons, Inc.
315-339-3083
Utica, NY
Poncell Construction co., Inc.
315-797-1826
Utica, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Rome NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- First Test: T-Drill T-35 Tee-Forming Tool Rome NY
- Home Repair Tools Rome NY
- Festool Joining System Rome NY
- Hidden-Fastener Tool Rome NY