Festool C12 Cordless Drill Riverhead NY

Festool C12 in Riverhead is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Maggie Wood Design
(631) 276-9633
P.O. Box 400
Jamesport, NY
Heller Developing Llc
(631) 727-6405
1015 E Main St
Riverhead, NY
Holland Construction
(631) 369-5205

Riverhead, NY
Tg Nickel
(631) 208-0565
260 W Main St
Riverhead, NY
Riverhead Estates Inc
(631) 369-7499
135 Northern Pkwy
Riverhead, NY
Amd Custom Homes
570-730-8150
Po Box 121
Brookhaven, NY
Saddle Lakes Hoa
(631) 208-8071
1 Saddle Lakes Dr
Riverhead, NY
Podlas Constr Inc
(631) 727-4549
505 Lincoln St
Riverhead, NY
L S M Development Corp
(631) 369-8058
45 E Main St
Riverhead, NY
Corwin Construction
(631) 727-6327
1117 Northville Tpke
Riverhead, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Riverhead NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Hidden-Fastener Tool Riverhead NY
- First Test: T-Drill T-35 Tee-Forming Tool Riverhead NY
- Festool Circ Saw and Guide Rail System Riverhead NY
- Home Repair Tools Riverhead NY