Festool C12 Cordless Drill Queensbury NY

Festool C12 in Queensbury is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Under the Sun Building and Remodeling, LLC
518-791-5353
Glens Falls, NY
Eric & Eric Construction
518-494-3611
Glens Falls, NY
Mike's Creative Contracting
(518) 798-6697
36 Maple Dr
Queensbury, NY
Kubricky Constr Corp
(518) 792-5864
237 Bay Rd
Queensbury, NY
Action-Craft Construction
(518) 743-0160
49 Buckbee Rd
Queensbury, NY
East River Builders, LLC
518-654-9559
Glens Falls, NY
Weidman Construction
518-798-3825
Glens Falls, NY
Pinchook Buckley Constr
(518) 793-5049
138 Quaker Rd
Queensbury, NY
Clute Enterprises Inc
(518) 793-7277
6 Holden Ave
Queensbury, NY
Crt Construction Co Inc
(518) 743-1000
53 Luzerne Rd
Queensbury, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Queensbury NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Home Repair Tools Queensbury NY
- Hidden-Fastener Tool Queensbury NY
- Festool Joining System Queensbury NY
- First Test: T-Drill T-35 Tee-Forming Tool Queensbury NY