Festool C12 Cordless Drill Poughkeepsie NY

Festool C12 in Poughkeepsie is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Energy Saving Solutions of the Hudson Valley, Inc
(845) 331-3025
85 Grand Street, Suite 992
Kingston, NY
Hudson Valley Construction
845-247-0701
Kingston, NY
David Borenstein Inc.
845-758-0021
Poughkeepsie, NY
Earth & Sun Energy
914-263-6900
Poughkeepsie, NY
Warwick Grove Company, LLC
845-986-5116
Poughkeepsie, NY
Jones Heating Cooling Plumbing And Electric
(845)566-3500
1100 Union Ave
Newburgh, NY
Atlas Construction Services, Inc.
845-679-9434
Kingston, NY
David B. Gubits
845-778-2121
Poughkeepsie, NY
DRM Development Group
845-223-7102
Poughkeepsie, NY
Kevin Gremli Construction Co. Inc.
845-496-3842
Poughkeepsie, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Hidden-Fastener Tool Poughkeepsie NY
Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.
- Festool Joining System Poughkeepsie NY
- Home Repair Tools Poughkeepsie NY
- First Test: T-Drill T-35 Tee-Forming Tool Poughkeepsie NY
- Festool Circ Saw and Guide Rail System Poughkeepsie NY