Festool C12 Cordless Drill Potsdam NY

Festool C12 in Potsdam is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

North Country Builders
(315) 268-0734
291 Morgan Rd
Potsdam, NY
Mastrandrea Pat
(516) 766-7522
2800 Morton Ave
Oceanside, NY
Desmond Painting & Decorating
(718) 343-7003
24455 88th Rd
Bellerose, NY
Ryan Homes of New York An Nvr Company
(585) 394-6094
4295 Angela Way
Canandaigua, NY
Mark Cerrone Inc
(716) 282-5244
2368 Maryland Ave
Niagara Falls, NY
Sheehan J E Constr Corp
(315) 265-8427
208 Sissonville Rd
Potsdam, NY
Hitchman Builders
(315) 265-1880
668 State Highway 11B
Potsdam, NY
Rial Bros Ltd
(212) 242-0117

New York, NY
Contractors Constr Co Inc
(914) 723-9497
Wilmot Rd
New Rochelle, NY
J & C Restoration Corp
(718) 482-8480
3208 38th Ave
Long Island City, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Potsdam NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Home Repair Tools Potsdam NY
- Festool Joining System Potsdam NY
- First Test: T-Drill T-35 Tee-Forming Tool Potsdam NY
- Hidden-Fastener Tool Potsdam NY