Festool C12 Cordless Drill Plattsburgh NY

Festool C12 in Plattsburgh is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Chittenden Builders and Remodelers
(802) 310-5284
rte 7
charlotte, VT
Homestead Design, Inc.
802-878-3303
Burlington, VT
Leach Construction of Vermont, LLC
802-434-5578
Burlington, VT
Tom Moore Builder, Inc.
802-899-2376
Burlington, VT
Yandow Dousevicz Construction Corp., Inc.
802-860-7315
Burlington, VT
Amoskeag Woodworking
(802)860-9588
30 Elm Court
Colchester, VT
Bickford Construction Corporation
802-872-7600
Burlington, VT
Just Great Properties, LLC
802-578-1546
Burlington, VT
Lefebvre Builders Incorporated
802-893-4216
Burlington, VT
Vermont Energy Investment Corporation (VEIC)
888-921-5990
Burlington, VT
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- First Test: T-Drill T-35 Tee-Forming Tool Plattsburgh NY
A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.
- Festool Circ Saw and Guide Rail System Plattsburgh NY
- Festool Joining System Plattsburgh NY
- Home Repair Tools Plattsburgh NY
- Hidden-Fastener Tool Plattsburgh NY