Festool C12 Cordless Drill Peekskill NY

Festool C12 in Peekskill is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Agape Remodeling
845-675-6942
1166 Route 9w
Highland Falls, NY
Coupart Construction Co., Inc.
(845) 562-5924
2 Lattintown Road
Newburgh, NY
Millennium Building Associates Incorporated
(914) 948-3069
56 Lafayette Ave
White Plains, NY
Jones Heating Cooling Plumbing And Electric
(845)566-3500
1100 Union Ave
Newburgh, NY
Metro NY Insulation, LLC
(845) 445-8255
60 Commerce Street Suite M
Spring Valley, NY
Access Nursing Services
(914) 747-9696
411 Manville Road
Pleasanville, NY
Absolute Green Homes, Inc.
914 977 3088
33 Truesdale Lake Drive
South Salem, NY
Alexander Building Corporation BLDG
(914) 949-3480
690 N Broadway
White Plains, NY
Elmore Associates
(800)437-0052
250 Sheldon Rd
Manchester, NY
American Pride Painting
(845) 216-2290
Serving NY, NJ and beyond
Chester, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Peekskill NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Hidden-Fastener Tool Peekskill NY
- Festool Joining System Peekskill NY
- First Test: T-Drill T-35 Tee-Forming Tool Peekskill NY
- Home Repair Tools Peekskill NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details