Festool C12 Cordless Drill Pearl River NY

Festool C12 in Pearl River is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Quality Industries Inc
(973)478-4425
204 Getty Av
Garfield, NJ
NuLite Enterprises
(201) 507-1912
30 Park Avenue
Lyndhurst, NJ
Metro NY Insulation, LLC
(845) 445-8255
60 Commerce Street Suite M
Spring Valley, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
Len Van Builders
31 Stalter Drive
Wayne, NJ
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
Green Living Solutions
(201) 390-4280
7 Fox Run Drive
Englewood, NJ
Mwanzi co.
(212) 551-3563
230 Park Avenue, Suite 1000
New York, NY
Suburban Green, LLC.
(877) 503-6374
23 Olney Road
Mahwah, NJ
Data Provided by:
      

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Hidden-Fastener Tool Pearl River NY
Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.
- First Test: T-Drill T-35 Tee-Forming Tool Pearl River NY
- Festool Joining System Pearl River NY
- Festool Circ Saw and Guide Rail System Pearl River NY
- Home Repair Tools Pearl River NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details