Festool C12 Cordless Drill Orchard Park NY

Festool C12 in Orchard Park is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Hughesco Of Buffalo
716-691-HOME
140 Irwin Place
Amherst, NY
Daytree Custom Builders, Inc.
631-981-5888
Buffalo, NY
Rosal Construction Co. Inc.
716-693-7831
Buffalo, NY
Stickl Construction
716-773-7344
Buffalo, NY
Zamkro Development LLC
716-479-0684
Buffalo, NY
Life Style Communities
P.O. Box 945
Hamburg, NY
David Michael Bruno Building & Remodeling Inc.
716-773-1422
Buffalo, NY
E'ko Contracting Inc.
716-842-1800
Buffalo, NY
Ryan Homes - Buffalo
716-674-4290
Buffalo, NY
TJW Custom Homes, Inc.
716-652-2798
Buffalo, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Orchard Park NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Festool Joining System Orchard Park NY
- Hidden-Fastener Tool Orchard Park NY
- Home Repair Tools Orchard Park NY
- First Test: T-Drill T-35 Tee-Forming Tool Orchard Park NY