Festool C12 Cordless Drill Oakland Gardens NY

Festool C12 in Oakland Gardens is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Kennan Ash Llc
212-759-9800
320 East 58Th Street
New York, NY
Eco Brooklyn Inc. - Green Contractor
(347) 244-3016
22 2nd street
Brooklyn, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
KS Construction and Kitchen Cabinets
(917) 864-2670
19541 Jamaica Avenue
Hollis, NY
Goode Green
212-226-6770
176 Grand Street
New York, NY
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
Green Living Solutions
(201) 390-4280
7 Fox Run Drive
Englewood, NJ
Bio-Solar LLC
(347) 413-5035
234 Madison St
Brooklyn, NY
Data Provided by:
        

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- First Test: T-Drill T-35 Tee-Forming Tool Oakland Gardens NY
A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.
- Hidden-Fastener Tool Oakland Gardens NY
- Festool Joining System Oakland Gardens NY
- Festool Circ Saw and Guide Rail System Oakland Gardens NY
- Home Repair Tools Oakland Gardens NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details