Festool C12 Cordless Drill Niagara Falls NY

Festool C12 in Niagara Falls is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

T.A.R. Consulting
716 675-3844
89 Lordan Dr
Cheektowaga, NY
Cameron Compression Systems
(716) 891-3895
3101 Broadway
Buffalo, NY
Ferguson Electric Construction Co., Inc.
(716) 852-2010
333 Ellicott St.
Buffalo, NY
Klyczek and Posmantur Electric
(716) 633-5148
190 Mill St.
Williamsville, NY
Hughesco Of Buffalo
716-691-HOME
140 Irwin Place
Amherst, NY
Continental Builders
(716) 283-2171
7304 Buffalo Ave
Niagara Falls, NY
JD Building Maintenance
(716) 897-2744
206 Reiman St.
Buffalo, NY
Turner Construction Co.
(716) 853-1900
135 Delaware Ave., Ste. 407
Buffalo, NY
Frey Electric Construction Co., Inc.
(716) 874-1710
100 Pearce Ave.
Tonawanda, NY
Eberl Iron Works, Inc.
(716) 854-7633
128 Sycamore St.
Buffalo, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Niagara Falls NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Hidden-Fastener Tool Niagara Falls NY
- Festool Joining System Niagara Falls NY
- First Test: T-Drill T-35 Tee-Forming Tool Niagara Falls NY
- Home Repair Tools Niagara Falls NY