Festool C12 Cordless Drill Newburgh NY

Festool C12 in Newburgh is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Jones Heating & Cooling Plumbing & Electric
(845)294-1010
230 Route 17A
Goshen, NY
American Pride Painting
(845) 216-2290
Serving NY, NJ and beyond
Chester, NY
David Borenstein Inc.
845-758-0021
Poughkeepsie, NY
Maag Construction Corp
845-477-2873
Poughkeepsie, NY
Walter Kisly Contractors
518-398-6393
Poughkeepsie, NY
Elmore Associates
(800)437-0052
250 Sheldon Rd
Manchester, NY
Jones Heating Cooling Plumbing And Electric
(845)566-3500
1100 Union Ave
Newburgh, NY
Classey Construction
845-298-2845
Poughkeepsie, NY
Kevin Gremli Construction Co. Inc.
845-496-3842
Poughkeepsie, NY
Schenk Builders of NY, Inc.
845-986-3661
Poughkeepsie, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Hidden-Fastener Tool Newburgh NY
Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.
- First Test: T-Drill T-35 Tee-Forming Tool Newburgh NY
- Festool Circ Saw and Guide Rail System Newburgh NY
- Festool Joining System Newburgh NY
- Home Repair Tools Newburgh NY