Festool C12 Cordless Drill Melville NY

Festool C12 in Melville is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

KS Construction and Kitchen Cabinets
(917) 864-2670
19541 Jamaica Avenue
Hollis, NY
A D C Construction LLC
(718) 217-8597
21247 Jamaica Ave
Queens Village, NY
D & E Properties Management And Services Llc
888-739-8741
234 North Brookside Avenue
Freeport, NY
AMRO Supply Inc. - Green Stuff Absorbents
(631) 419-1203
140-11 Keyland Ct.
Bohemia, NY
Danzio Renovation Corp
631-940-5893
533 Narland
Babylon, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
12 Gage Electric
(631)451-0601
63 Iriquois Avenue
Selden, NY
L.I.S. Custom Designs, Inc.
(516) 484-6262
100 Andrews Rd.
Hicksville, NY
A. Oliveri Siding & Remodeling
(631) 588-5032
250 Donald Blvd
Holbrook, NY
Data Provided by:
        

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Melville NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- First Test: T-Drill T-35 Tee-Forming Tool Melville NY
- Hidden-Fastener Tool Melville NY
- Home Repair Tools Melville NY
- Festool Joining System Melville NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details