Festool C12 Cordless Drill Mastic NY

Festool C12 in Mastic is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

12 Gage Electric
(631)451-0601
63 Iriquois Avenue
Selden, NY
Maggie Wood Design
(631) 276-9633
P.O. Box 400
Jamesport, NY
A. Oliveri Siding & Remodeling
(631) 588-5032
250 Donald Blvd
Holbrook, NY
J Dertinger Contracting Corp
(631) 399-9401
65 Washington Dr
Mastic, NY
Kel-Tech Constr Inc
(718) 383-3353
251 Monitor St
Brooklyn, NY
Manhattan Contracting Corp.
(631) 584-5155
34 East Main Street
Smithtown, NY
Amd Custom Homes
570-730-8150
Po Box 121
Brookhaven, NY
AMRO Supply Inc. - Green Stuff Absorbents
(631) 419-1203
140-11 Keyland Ct.
Bohemia, NY
Ldl Contracting
(631) 281-0507
243 Whittier Dr
Mastic, NY
New Perspective Bldg Inc
(631) 878-4678
1280 Montauk Hwy
Mastic, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Mastic NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- First Test: T-Drill T-35 Tee-Forming Tool Mastic NY
- Home Repair Tools Mastic NY
- Festool Joining System Mastic NY
- Hidden-Fastener Tool Mastic NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details