Festool C12 Cordless Drill Liverpool NY

Festool C12 in Liverpool is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Bella Casa Builders By Alberici
131-545-4034
Syracuse, NY
Loscombe Custom Homes, Inc.
315-451-4141
Syracuse, NY
Natoli General Contractors
315-342-8850
Syracuse, NY
Oot Bros., Inc.
315-656-7251
Syracuse, NY
Vaadi Construction
315-783-9731
Syracuse, NY
McClurg Remodeling & Construction
60 East Main Street
Marcellus, NY
JMG Custom Homes
315-698-1009
Syracuse, NY
Mark Antony Contracting, Inc.
315-413-1000
Syracuse, NY
Northeast Natural Homes
315-478-6016
Syracuse, NY
McClurg Remodeling & Construction Services
315-673-2051
Syracuse, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Liverpool NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Festool Circ Saw and Guide Rail System Liverpool NY
- First Test: T-Drill T-35 Tee-Forming Tool Liverpool NY
- Hidden-Fastener Tool Liverpool NY
- Home Repair Tools Liverpool NY