Festool C12 Cordless Drill Kew Gardens NY

Festool C12 in Kew Gardens is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Agl Construction Corp.
(201) 783-3799
528 Hudson Street
Hoboken, NJ
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
Quality Industries Inc
(973)478-4425
204 Getty Av
Garfield, NJ
Eco Brooklyn Inc. - Green Contractor
(347) 244-3016
22 2nd street
Brooklyn, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Builders North Llc
201-758-8217
1207 Summit Ave
Union City, NJ
Jc General Construction.Inc
201 780 7379
712 26
Union City, NJ
Green Living Solutions
(201) 390-4280
7 Fox Run Drive
Englewood, NJ
Bio-Solar LLC
(347) 413-5035
234 Madison St
Brooklyn, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Kew Gardens NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Home Repair Tools Kew Gardens NY
- Festool Joining System Kew Gardens NY
- Hidden-Fastener Tool Kew Gardens NY
- First Test: T-Drill T-35 Tee-Forming Tool Kew Gardens NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details