Festool C12 Cordless Drill Jackson Heights NY

Festool C12 in Jackson Heights is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

1St Call Painting Contractors
(908)354-2375
980 Dehart Place
Elizabeth, NJ
Jc General Construction.Inc
201 780 7379
712 26
Union City, NJ
Quality Industries Inc
(973)478-4425
204 Getty Av
Garfield, NJ
Susan Singer EcoSpaces (Realtor)
(212) 444-7866
636 Sixth Avenue
New York, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
AJ NYC CONSTRUCTION CORP
(917) 470-0009
2080 EAST 61st ST
Brooklyn, NY
Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Kennan Ash Llc
212-759-9800
320 East 58Th Street
New York, NY
Green Living Solutions
(201) 390-4280
7 Fox Run Drive
Englewood, NJ
L.I.S. Custom Designs, Inc.
(516) 484-6262
100 Andrews Rd.
Hicksville, NY
Data Provided by:
      

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Jackson Heights NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Hidden-Fastener Tool Jackson Heights NY
- First Test: T-Drill T-35 Tee-Forming Tool Jackson Heights NY
- Home Repair Tools Jackson Heights NY
- Festool Joining System Jackson Heights NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details