Festool C12 Cordless Drill Glens Falls NY

Festool C12 in Glens Falls is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Adams & Associates
(518) 290-3001
1 Huestis Ct
Saratoga Springs, NY
Bonacio Construction Incorporated
(518) 584-9007
18 Division St Ste 401
Saratoga Springs, NY
G & G Construction
(518) 584-0467
Ruggles Rd
Saratoga Springs, NY
Under the Sun Building and Remodeling, LLC
518-791-5353
Glens Falls, NY
Eric & Eric Construction
518-494-3611
Glens Falls, NY
21st Century Homes & Structures
518-532-7900
250 Excelsior Drive
Saratoga Springs, NY
Blueline Construction
(518) 583-2801
26 Bensonhurst Ave
Saratoga Springs, NY
Conboy & Mannion Contrctng Inc
(518) 583-4038
10 Lake Ave Ste 3
Saratoga Springs, NY
East River Builders, LLC
518-654-9559
Glens Falls, NY
Weidman Construction
518-798-3825
Glens Falls, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- First Test: T-Drill T-35 Tee-Forming Tool Glens Falls NY
A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.
- Festool Joining System Glens Falls NY
- Home Repair Tools Glens Falls NY
- Festool Circ Saw and Guide Rail System Glens Falls NY
- Hidden-Fastener Tool Glens Falls NY