Festool C12 Cordless Drill Elmont NY

Festool C12 in Elmont is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Goode Green
212-226-6770
176 Grand Street
New York, NY
Jc General Construction.Inc
201 780 7379
712 26
Union City, NJ
David Bergman Architect
(212) 475-3106
241 Eldridge St. 3R
New York, NY
Eco Brooklyn Inc. - Green Contractor
(347) 244-3016
22 2nd street
Brooklyn, NY
Greendepot
(718) 782-2991
1 ivy hill way
Brooklyn, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
Kennan Ash Llc
212-759-9800
320 East 58Th Street
New York, NY
Mwanzi co.
(212) 551-3563
230 Park Avenue, Suite 1000
New York, NY
Build Green Inc.
(516) 902-7998
221 East 83rd Street, 2R
New York, NY
Data Provided by:
        

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Elmont NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Festool Joining System Elmont NY
- Hidden-Fastener Tool Elmont NY
- Home Repair Tools Elmont NY
- First Test: T-Drill T-35 Tee-Forming Tool Elmont NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details