Festool C12 Cordless Drill Elmhurst NY

Festool C12 in Elmhurst is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

AJ NYC CONSTRUCTION CORP
(917) 470-0009
2080 EAST 61st ST
Brooklyn, NY
Jc General Construction.Inc
201 780 7379
712 26
Union City, NJ
Bio-Solar LLC
(347) 413-5035
234 Madison St
Brooklyn, NY
Fine Green Design
(703) 501-3907
65 North Fullerton ave #7
Montclair, NJ
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
Builders North Llc
201-758-8217
1207 Summit Ave
Union City, NJ
Mwanzi co.
(212) 551-3563
230 Park Avenue, Suite 1000
New York, NY
Build Green Inc.
(516) 902-7998
221 East 83rd Street, 2R
New York, NY
Green Harmony Now, LLC
(973) 233-1106
P O BOX 550
Montclair, NJ
Data Provided by:
        

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Elmhurst NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Hidden-Fastener Tool Elmhurst NY
- Festool Joining System Elmhurst NY
- First Test: T-Drill T-35 Tee-Forming Tool Elmhurst NY
- Home Repair Tools Elmhurst NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details