Festool C12 Cordless Drill Dunkirk NY

Festool C12 in Dunkirk is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

Kessel Construction
(716) 366-5407
3800 Middle Rd
Dunkirk, NY
Professional Contractors
(716) 366-2194
3085 Middle Rd
Dunkirk, NY
Gerwitz & McNeil Electric Inc
(716) 592-3002
5756 Thornwood Dr
West Valley, NY
Coastal Constr & Design
(631) 858-0051
5 Greendale Ln
East Northport, NY
Ferrera Development Corp
(315) 462-2921
79 Kendall St
Clifton Springs, NY
Fadale S Enterprise
(716) 366-1466
422 Central Ave
Dunkirk, NY
Chadwick Bay Construction Llc
(716) 366-5671
10883 S Roberts Rd
Dunkirk, NY
Panestone Construction Inc
(718) 492-0588
638 62nd St
Brooklyn, NY
New Crest Construction
(631) 399-3319
30 Belmont Dr
Shirley, NY
Drain Care Septic & Sewer Service
(518) 664-9903

Melrose, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Circ Saw and Guide Rail System Dunkirk NY
The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site.
- Festool Joining System Dunkirk NY
- Home Repair Tools Dunkirk NY
- First Test: T-Drill T-35 Tee-Forming Tool Dunkirk NY
- Hidden-Fastener Tool Dunkirk NY