Festool C12 Cordless Drill Cortland NY

Festool C12 in Cortland is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

BUILDlab, LLC
607-592-9309
Ithaca, NY
Ciappa & Marinelli Builders, Inc.
607-272-1755
Ithaca, NY
Ness Construction, LLC
607-387-5019
Ithaca, NY
R. Scott Billings, Inc.
607-279-4249
Ithaca, NY
Balance Studio, LLC
607-277-0242
Ithaca, NY
Antony Hsu
212-679-5473
Ithaca, NY
Cayuga Country Homes Incorporated
607-844-4316
Ithaca, NY
Habitat for Humanity of Tompkins and Cortland Counties
607-753-8510
Ithaca, NY
Northeast Renovation, Inc.
607-543-1310
Ithaca, NY
Skyrise Associates, LLC
607-273-9300
Ithaca, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- First Test: T-Drill T-35 Tee-Forming Tool Cortland NY
A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.
- Home Repair Tools Cortland NY
- Hidden-Fastener Tool Cortland NY
- Festool Joining System Cortland NY
- Festool Circ Saw and Guide Rail System Cortland NY