Festool C12 Cordless Drill Corning NY

Festool C12 in Corning is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

LanD Custom Homes (LanD Ent. So. Tier, Inc.)
607-739-7849
Elmira, NY
Malone Home Builders Inc
(607) 936-1660
113 W Market St
Corning, NY
Schaller Leo N & Son
(607) 962-2623
395 Lower Delevan Ave
Corning, NY
Hess Assocs Inc
(607) 937-4266
2353 Caton Rd
Corning, NY
Krog Corp
(607) 936-4601
8 Denison Pkwy E
Corning, NY
Doane Builders, Inc.
607-737-1064
Elmira, NY
Keuka Constr Corp
(607) 962-6851
196 W 6th St
Corning, NY
Rockwood Construction Co
(607) 936-1000

Corning, NY
Community Progress Inc
(607) 962-3506
147 E 2nd St
Corning, NY
Schaller Raymond T
(607) 962-2623
395 Lower Delevan Ave
Corning, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Hidden-Fastener Tool Corning NY
Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.
- Home Repair Tools Corning NY
- First Test: T-Drill T-35 Tee-Forming Tool Corning NY
- Festool Circ Saw and Guide Rail System Corning NY
- Festool Joining System Corning NY