Festool C12 Cordless Drill Bethpage NY

Festool C12 in Bethpage is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Local Companies

KS Construction and Kitchen Cabinets
(917) 864-2670
19541 Jamaica Avenue
Hollis, NY
Kramer Roofing & Siding Contractors
(718) 359-0142
1408 128th St
Flushing, NY
Fresh Meadow Mechanical
(718) 468-3191
7925 Winchester Blvd
Queens Village, NY
Plus Wood Floors
203 4960134
33 23 147 Place
Flushing, NY
AMRO Supply Inc. - Green Stuff Absorbents
(631) 419-1203
140-11 Keyland Ct.
Bohemia, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
A D C Construction LLC
(718) 217-8597
21247 Jamaica Ave
Queens Village, NY
D & E Properties Management And Services Llc
888-739-8741
234 North Brookside Avenue
Freeport, NY
L.I.S. Custom Designs, Inc.
(516) 484-6262
100 Andrews Rd.
Hicksville, NY
Data Provided by:
        

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 9, 2006

By TOOLS OF THE TRADE Editors

Point blank: This is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.

Out of the Box. The C12 is an impressive if unorthodox-looking tool. Its compact slide-on 1.3-amp-hour nicad battery exchanged nicely, the tool was well-balanced, and all switches were easy to reach and work. At 3 pounds 6.8 ounces, it's one of the lightest 12-volt nicad drill/drivers on the market. Its onboard bit storage is excellent: Instead of pinching driver bits in fingernail-bending metal clips, it holds them securely with magnets. To remove bits, slide them in the storage channel, up a ramp, and out. Top-notch design.

The tool also ships with a hex drive bit holder (finally!) and a keyless 1/2-inch chuck that are exchangeable using no tools. And, both chucks have bearing collars to protect work–very smart. Remove either chuck and the C12 also turns bits directly from the tool. I used the hex drive with Festool's magnetic bit holder the most. While I liked it, I'd get extras because the shank isn't compatible with standard 1/4-inch hex-drive accessories. The C12 also ships with an incredibly sharp 1/8-inch brad-point drill bit.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Bethpage NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- First Test: T-Drill T-35 Tee-Forming Tool Bethpage NY
- Festool Circ Saw and Guide Rail System Bethpage NY
- Home Repair Tools Bethpage NY
- Hidden-Fastener Tool Bethpage NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details