FIC AD11 Motherboard West Hempstead NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

American Data Mart
(212) 557-9191
124 E 40th Street
New York, NY
Hardware Tek
(718) 491-2403
6918 Fort Hamilton Parkway
Brooklyn, NY
Inteliserve Inc
(516) 933-4388
210 Miller Place
Hicksville, NY
NTS Computer Inc.
(212) 260-4338
215 1st Avenue
New York, NY
Mayen Micro Systems
(516) 775-1427
845 Bauer Street
Elmont, NY
AA ELLETECH - We offer low cost computers and services! SATISFACTION BELONGS TO YOU! SO CALL US!
(888) 355-3832
New York, NY
Eastern Computer Center Inc
(718) 833-0888
5710 8th Avenue
Brooklyn, NY
Heritage Products Inc
(516) 678-4141
333 W Merrick Road
Valley Stream, NY
Mainpc Group Inc
(718) 788-2883
Brooklyn, NY
Smith Walter Computer Consultant
(718) 562-5537
54 East 181st Street
Bronx, NY
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- Foxconn K8T890M2AA-KRS2H Motherboard West Hempstead NY
We check out a cheap Foxconn motherboard for Socket AM2 processors based on a VIA chipset. Are VIA back in the game? If you're interested to know about this motherboard, read on for our review.
- ECS NF650iSLIT-A Motherboard West Hempstead NY
- EPoX 9NDA3+ Socket 939 Motherboard West Hempstead NY
- Gigabyte N680SLI-DQ6 Motherboard West Hempstead NY
- FIC AZ11EA Motherboard West Hempstead NY
- Epox 8KHA KT266 Motherboard West Hempstead NY