FIC AD11 Motherboard Staten Island NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

PC Supplies CO
(732) 422-0100
New Brunswick, NJ
Capitol Electrical Supply CO
(212) 534-3546
2289 3rd Avenue
New York, NY
Computer Sales and Service
(908) 931-1200
6 Commerce Drive
Cranford, NJ
On Line Computer Inc
(212) 695-1244
224 W 30th Street # 1005
New York, NY
Turtle and Hughes Inc
(201) 604-1371
376 6th Street
Jersey City, NJ
Nextsource
(212) 223-2192
120 East 56th Street
New York, NY
ASR Computers
(718) 292-2393
109 E 153rd St
Bronx, NY
Captive Network
(646) 536-5166
535 Madison Avenue
New York, NY
Nacomex USA
(718) 681-9210
255 Eern Parkway
Brooklyn, NY
P C Age
(732) 287-3622
145 Talmadge Road # 19
Edison, NJ
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- ECS NF650iSLIT-A Motherboard Staten Island NY
Core 2 Duo and SLI, the dream platform for you, but previously too expensive to consider. ECS come to the rescue! Get all the info on this affordable motherboard and see if this is the right one for you.
- Epox 8KHA KT266 Motherboard Staten Island NY
- FIC AZ11EA Motherboard Staten Island NY
- EPoX 9NDA3+ Socket 939 Motherboard Staten Island NY
- Foxconn K8T890M2AA-KRS2H Motherboard Staten Island NY
- Gigabyte N680SLI-DQ6 Motherboard Staten Island NY