FIC AD11 Motherboard Rochester NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

Intercon Associates Inc
(585) 244-1250
95 Allens Creek Road # 200
Rochester, NY
Masline Electronics Inc
(800) 593-8342
511 Clinton Avenue South
Rochester, NY
SCJ Associates Inc
(585) 359-0600
60 Commerce Drive
Rochester, NY
Zei Microsystems
(800) 820-5003
762 Crosskeys Office Park
Fairport, NY
Sun Microsystems
(585) 385-5000
345 Woodcliff Drive # 1
Fairport, NY
3DCOOL.Com
(585) 586-3560
30 Grove Street B
Pittsford, NY
Lazercraft
(585) 254-8440
1749 Lyell Avenue
Rochester, NY
Recharge Networks Inc
(585) 546-1060
439 Central Avenue # 108
Rochester, NY
UTC Retail
(585) 924-9500
100 Rawson Road # 210
Victor, NY
IPS Computer Systems
(585) 385-8777
17 South Main Street
Pittsford, NY
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- EPoX 9NDA3+ Socket 939 Motherboard Rochester NY
The following article looks at the EPoX 9NDA3+ Socket 939 motherboard, which is based around nVidia's nForce3 Ultra chipset. The motherboard makes use of an AGP port instead of the newer PCI-Express version, which makes it a good option for users wanting to keep their old yet workable AGP graphics card and upgrade to the new Socket 939 Athlon 64 platform.
- Foxconn K8T890M2AA-KRS2H Motherboard Rochester NY
- Gigabyte N680SLI-DQ6 Motherboard Rochester NY
- ECS NF650iSLIT-A Motherboard Rochester NY
- Epox 8KHA KT266 Motherboard Rochester NY
- FIC AZ11EA Motherboard Rochester NY