FIC AD11 Motherboard Larchmont NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

Cole Solutions
(212) 625-6526
174 Hudson Street
New York, NY
Kaikin Enterprises Inc
(516) 536-9746
1 Wright Road
Rockville Centre, NY
Rock Technology Consultants
(201) 251-1167
158 Gramercy Place
Glen Rock, NJ
Morris Hardware
(718) 293-0172
271 E 170th Street
Bronx, NY
On Point Networking
(862) 823-1188
118 Bergen Ave
Ridgefield Park, NJ
PC Mobile Station Dot Com Corporation
(212) 625-3886
57 Division Street
New York, NY
E Media Plus Inc
(201) 525-0100
71 Schrieffer Street
South Hackensack, NJ
Mac Attack
(212) 989-0838
210 W 10th St
New York, NY
Citadel NY Inc
(212) 931-8862
New York, NY
NBI Computers
(718) 549-1463
6495 Broadway Suite 4t
Bronx, NY
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- FIC AZ11EA Motherboard Larchmont NY
After the success of the AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Read on to learn more about the AZ11E.
- EPoX 9NDA3+ Socket 939 Motherboard Larchmont NY
- Epox 8KHA KT266 Motherboard Larchmont NY
- Gigabyte N680SLI-DQ6 Motherboard Larchmont NY
- ECS NF650iSLIT-A Motherboard Larchmont NY
- Foxconn K8T890M2AA-KRS2H Motherboard Larchmont NY