FIC AD11 Motherboard Huntington NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

Captivate Networks Corporation
(631) 752-3623
58 S Service Road
Melville, NY
D Technologies Inc
(631) 752-5777
68 Allen Boulevard
Farmingdale, NY
Graybar ELEC CO Inc
(631) 234-7200
10 Central Avenue
Hauppauge, NY
Long Island Computer Helper
(516) 777-1383
194 Merritts Road
Farmingdale, NY
Silicon Valley Comp
(203) 569-5777
1061 North Street
Greenwich, CT
Atlantic Computertech
(516) 825-4804
130 Horton Avenue
Lynbrook, NY
Crescent Resources Inc
(516) 935-4122
8 Chestnut Drive
Plainview, NY
EDU Tek Limited
(914) 686-7778
Mamaroneck, NY
Hauppauge Digital Inc
(631) 434-1600
91 Cabot Court
Hauppauge, NY
Computer Repair and Networking Long Island
(631) 592-9595
149 w. Montauk Hwy
Lindenhurst, NY
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- Gigabyte N680SLI-DQ6 Motherboard Huntington NY
We look at Gigabyte's fancy N680SLI-DQ6 and try to find out if it was worth the wait for their nForce 680i motherboard. If you want to know all about this motherboard and if it was worth the wait, keep on reading.
- ECS NF650iSLIT-A Motherboard Huntington NY
- EPoX 9NDA3+ Socket 939 Motherboard Huntington NY
- Foxconn K8T890M2AA-KRS2H Motherboard Huntington NY
- Epox 8KHA KT266 Motherboard Huntington NY
- FIC AZ11EA Motherboard Huntington NY