FIC AD11 Motherboard Hollis NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

East Hardware
(212) 677-5924
79 3rd Avenue
New York, NY
Konica Minolta Graphic Imaging
(516) 674-2800
71 Charles Street
Glen Cove, NY
MCS Inc
(718) 617-2776
1673 E 172nd Street
Bronx, NY
The British Apparel Collection Limited
(212) 218-6520
610 5th Avenue Rm 308
New York, NY
Citadel NY Inc
(212) 721-1467
62 William Street # 6
New York, NY
Compurx Inc
(201) 568-4477
236 W Clinton Avenue
Tenafly, NJ
Harlem Apple
(347) 801-0101
227-229 W. 145th St
New York, NY
Lasertone
(718) 545-7100
102 26th Avenue
Astoria, NY
Seaboard Electronics
(914) 235-8073
70 Church Street
New Rochelle, NY
Action Computer and IT Services
(516) 470-1174
PO BOX 968
Levittown, NY
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- FIC AZ11EA Motherboard Hollis NY
After the success of the AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Read on to learn more about the AZ11E.
- EPoX 9NDA3+ Socket 939 Motherboard Hollis NY
- Foxconn K8T890M2AA-KRS2H Motherboard Hollis NY
- Epox 8KHA KT266 Motherboard Hollis NY
- ECS NF650iSLIT-A Motherboard Hollis NY
- Gigabyte N680SLI-DQ6 Motherboard Hollis NY