FIC AD11 Motherboard East Syracuse NY

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Local Companies

CNY Laser Service Inc
(315) 437-7574
380 N Midler Avenue
Syracuse, NY
Eastern Computer Warehouse
(315) 449-0111
5802 Bridge Street
East Syracuse, NY
Miami Computer Supply Inc
(315) 454-0038
5858 E Molloy Road # 118A
Syracuse, NY
Computer Outlet
(315) 698-2464
8274 Route 11
Cicero, NY
Eastern Computer Warehouse
(315) 449-0111
3470 Erie Boulivard East
Syracuse, NY
Peter Perry
(315) 687-7757
8502 Green Lakes Road
Fayetteville, NY
Data Key Inc
(315) 682-7999
8195 Cazenovia Road
Manlius, NY
Ecopac Equipment
(315) 422-6315
113 N Main Street
Syracuse, NY
AG World, Inc.
(315) 452-0553
7679 Glenview Drive
North Syracuse, NY
Computer Outlet
(315) 451-1938
103 Electronics Parkway
Liverpool, NY
Data Provided by:
  




Introduction

The FIC AD11 is FIC’s fifth motherboard for the AMD K7 processor line. The first board to come from FIC to support the K7 family was the SD11. The SD11 was an ATX from factor board based on the AMD 751 Northbridge chipset and the VIA 686A Southbridge. This was the very first AMD K7 board to market. This board did have some problems with the board resetting on the user randomly, this was fixed later on with a resistor added to the board. Along with most of the AMD 750 bard boards, the SD11 did have some problems getting GeForce classed video cards to run in AGP2x mode. Symptoms of the GeForce bug was the system crashing in games that required the 3D acceleration. Later revisions of the AMD 750 chipset with the upper Bypass did pretty well resolve this problem but this slight glitch did put a damper on 750 based boards. Like MSI, FIC skipped the whole KX133 stage of chipsets and waited until the introduction of the KT133 chipset. When the KT133 became readily available, FIC used this chipset and created the FIC AZ11. This AZ11 like the SD11 was the first Socket A solution to market. The AZ11 was one of the first motherboard to actually show support for the AMD Athlon/Duron overclocking features, FIC had placed jumper solders for the multiplier adjustments but no pins. If the user wanted to adjust the multiplier of a AMD Athlon/Duron CPU on this board the user would have to solder the jumper pins onto the board themselves.

After the success of the FIC AZ11 and the introduction of the VIA 686B Southbridge, FIC took the AZ11 designed, added built in overclocking options and added the 686B Southbridge and labeled it the AZ11E. Now with the introduction of the new DDR standards FIC has taken the new AMD 760 Northbridge and the VIA VT82C686B Southbridge and paired them together to create the new FIC AD11.

Click Here to Read Complete Review

Related Articles
- Foxconn K8T890M2AA-KRS2H Motherboard East Syracuse NY
We check out a cheap Foxconn motherboard for Socket AM2 processors based on a VIA chipset. Are VIA back in the game? If you're interested to know about this motherboard, read on for our review.
- FIC AZ11EA Motherboard East Syracuse NY
- Epox 8KHA KT266 Motherboard East Syracuse NY
- EPoX 9NDA3+ Socket 939 Motherboard East Syracuse NY
- ECS NF650iSLIT-A Motherboard East Syracuse NY
- Gigabyte N680SLI-DQ6 Motherboard East Syracuse NY