Electric Concrete Breakers Watertown NY

Electric-powered breaker hammers have found a niche in the construction trades. In a wide variety of circumstances, these convenient tools fit the bill for small-scale demolition work.

Local Companies

Anderson Equipment Company
(315) 788-5512
22607 Murrock Cir
Watertown, NY
Equipment Rentals Inc
(315) 788-7368
Bradley Street Rd
Watertown, NY
Mc Quade & Bannigan Inc
(315) 788-2612
22696 Murrock Cir
Watertown, NY
North State Supply Co Inc
(315) 782-8247
22432 US Route 11
Watertown, NY
Blair Supply Corp
(315) 788-4846
22320 Teal Dr
Watertown, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: April 9, 2008

By Paul M. Newman and Bill Palmer

Electric-powered breaker hammers have found a niche in the construction trades. In a wide variety of circumstances, these convenient tools fit the bill for small-scale demolition work.

In our 30-plus years in construction, we've run into just about every kind of situation these tools were meant to handle. So for this test, we used them on a variety of demolition projects to see how they'd perform under different circumstances, from busting up commercial floor slabs to carefully chiseling grooves into vertical concrete surfaces.

We tested 12 breakers in three size/weight categories. The lightest , at about 25 pounds, are the brand new DeWalt D25941K, the Hilti TE905-AVR, Milwaukee 5339-21, and Wacker EH9BLM. The medium-weight, of about 35 to 40 pounds, are the Bosch 11335K Jack, Hitachi H65SD2, and Makita HM1304B. The heaviest breakers, of about 60 to 70 pounds, include the Bosch 11304K Brute, DeWalt D25980K, Hitachi H90SEKIT4, Makita HM1810X3, and the brand new Wacker EH27 Low Vib.

Out of the Box

The light and medium-weight models all come in rigid carrying cases, and a few have breaker points–generically called "tools" or "steel." The Makita and Bosch cases have small but nice integral wheels for easier transport on smooth surfaces.

The heavy breakers all come w...

Click here to read full article from Tools of the Trade

Related Articles
- Formwork Rust Watertown NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Green Construction Watertown NY
- Galvanized Wall Ties Watertown NY
- Incorrect Testing Practices Watertown NY
- Eliminating Swirls in Precast Panels Watertown NY
- In Style with Tile Watertown NY
- Fibers for Permeability Watertown NY
- Galvanized Wall Ties Watertown NY
- Form-Release Agents Watertown NY
- Fiber Reinforced Concrete Watertown NY