Electric Concrete Breakers North Tonawanda NY

Electric-powered breaker hammers have found a niche in the construction trades. In a wide variety of circumstances, these convenient tools fit the bill for small-scale demolition work.

Local Companies

Watts Architecture & Engineering, P.C.
(716) 836-1540
3826 Main St.
Amherst, NY
Harry R. Defler Corp.
(716) 839-3727
4446 Main St.
Buffalo, NY
ARC Building & Construction Company
(716) 694-0928
396 Robinson St.
North Tonawanda, NY
Lake Side Contracting Co., Inc.
(716) 681-6260
3198 Union Rd., Ste. 500
Cheektowaga, NY
NOCO Energy Corp.
(716) 614-6626
2440 Sheridan Dr.
Tonawanda, NY
Egleston General Construction
716-207-6977
36 Stone Hedge Dr.
Lancaster, NY
Cannon Design
(716) 773-6800
2170 Whitehaven Rd.
Grand Island, NY
National Fuel Gas Distribution Corporation
(716) 857-7000
6363 Main St.
Williamsville, NY
DiPizio Construction Co., Inc.
(716) 892-1097
100 Stradtman St.
Cheektowaga, NY
Sullivan Landscaping
(716) 839-4584
196 Darwin Dr.
Amherst, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: April 9, 2008

By Paul M. Newman and Bill Palmer

Electric-powered breaker hammers have found a niche in the construction trades. In a wide variety of circumstances, these convenient tools fit the bill for small-scale demolition work.

In our 30-plus years in construction, we've run into just about every kind of situation these tools were meant to handle. So for this test, we used them on a variety of demolition projects to see how they'd perform under different circumstances, from busting up commercial floor slabs to carefully chiseling grooves into vertical concrete surfaces.

We tested 12 breakers in three size/weight categories. The lightest , at about 25 pounds, are the brand new DeWalt D25941K, the Hilti TE905-AVR, Milwaukee 5339-21, and Wacker EH9BLM. The medium-weight, of about 35 to 40 pounds, are the Bosch 11335K Jack, Hitachi H65SD2, and Makita HM1304B. The heaviest breakers, of about 60 to 70 pounds, include the Bosch 11304K Brute, DeWalt D25980K, Hitachi H90SEKIT4, Makita HM1810X3, and the brand new Wacker EH27 Low Vib.

Out of the Box

The light and medium-weight models all come in rigid carrying cases, and a few have breaker points–generically called "tools" or "steel." The Makita and Bosch cases have small but nice integral wheels for easier transport on smooth surfaces.

The heavy breakers all come w...

Click here to read full article from Tools of the Trade

Related Articles
- Formwork Rust North Tonawanda NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Incorrect Testing Practices North Tonawanda NY
- Eliminating Swirls in Precast Panels North Tonawanda NY
- Fibers for Permeability North Tonawanda NY
- Fiber Reinforced Concrete North Tonawanda NY
- Form-Release Agents North Tonawanda NY
- Galvanized Wall Ties North Tonawanda NY
- Green Construction North Tonawanda NY
- In Style with Tile North Tonawanda NY
- Galvanized Wall Ties North Tonawanda NY