Electric Concrete Breakers Niagara Falls NY

Electric-powered breaker hammers have found a niche in the construction trades. In a wide variety of circumstances, these convenient tools fit the bill for small-scale demolition work.

Local Companies

Cameron Compression Systems
(716) 891-3895
3101 Broadway
Buffalo, NY
Design For Industry, Inc.
(716) 204-0299
425 Cayuga Rd., Ste. 400
Cheektowaga, NY
Changes Construction, Inc.
(716) 830-3081
55 Manchester Pl.
Buffalo, NY
Lang's Landscaping, Inc.
(716) 633-1983
25 Smallwood Terr.
Cheektowaga, NY
Klein Steel Service, Inc.
(716) 826-6060
1050 Military Rd.
Buffalo, NY
T & D Ceramics
(716) 894-9209
2133 Broadway
Cheektowaga, NY
Birdair, Inc.
(716) 633-9500
65 Lawrence Bell Dr., Ste. 100
Williamsville, NY
ARC Building & Construction Company
(716) 694-0928
396 Robinson St.
North Tonawanda, NY
Jackye Mandell Interiors
(716) 833-6477
78 Starin Ave.
Buffalo, NY
Lockport Energy Associates, L.P.
(716) 439-1004
5087 Junction Rd.
Lockport, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: April 9, 2008

By Paul M. Newman and Bill Palmer

Electric-powered breaker hammers have found a niche in the construction trades. In a wide variety of circumstances, these convenient tools fit the bill for small-scale demolition work.

In our 30-plus years in construction, we've run into just about every kind of situation these tools were meant to handle. So for this test, we used them on a variety of demolition projects to see how they'd perform under different circumstances, from busting up commercial floor slabs to carefully chiseling grooves into vertical concrete surfaces.

We tested 12 breakers in three size/weight categories. The lightest , at about 25 pounds, are the brand new DeWalt D25941K, the Hilti TE905-AVR, Milwaukee 5339-21, and Wacker EH9BLM. The medium-weight, of about 35 to 40 pounds, are the Bosch 11335K Jack, Hitachi H65SD2, and Makita HM1304B. The heaviest breakers, of about 60 to 70 pounds, include the Bosch 11304K Brute, DeWalt D25980K, Hitachi H90SEKIT4, Makita HM1810X3, and the brand new Wacker EH27 Low Vib.

Out of the Box

The light and medium-weight models all come in rigid carrying cases, and a few have breaker points–generically called "tools" or "steel." The Makita and Bosch cases have small but nice integral wheels for easier transport on smooth surfaces.

The heavy breakers all come w...

Click here to read full article from Tools of the Trade

Related Articles
- Formwork Rust Niagara Falls NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Eliminating Swirls in Precast Panels Niagara Falls NY
- Galvanized Wall Ties Niagara Falls NY
- Galvanized Wall Ties Niagara Falls NY
- Form-Release Agents Niagara Falls NY
- Fibers for Permeability Niagara Falls NY
- Green Construction Niagara Falls NY
- Incorrect Testing Practices Niagara Falls NY
- Fiber Reinforced Concrete Niagara Falls NY
- In Style with Tile Niagara Falls NY