Electric Chainsaws Monsey NY

When you think of chainsaws in construction work in Monsey, your mind usually goes to builders of log homes, pole barns, docks, fences, and perhaps timber framers.

Local Companies

Fastenal- East Rutherford
201-804-2228
33 Rt 17 South East Rutherford, NJ, 07073
East Rutherford, NJ
Greenwood Lumber
845-477-2699
702 Jersey Ave
Greenwood Lake, NY
Lowe's
(973) 341-8102
265 Mclean Boulevard
Paterson, NJ
The Home Depot
(845)781-4307
254 Larkin Drive
Monroe, NY
Hackensack - A
(201) 525-5200
436 Main St
Hackensack, NJ
BOARDS & BEAMS, CO.
(973) 299-6100
48 OLD JACKSONVILLE ROAD
TOWACO, NJ
Schall Paint & Hardware
914-965-3339
311 Saw Mill River Rd
Yonkers, NY
Sloatsburg Hardware
845-753-2725
88 Orange Turnpike
Sloatsburg, NY
The Home Depot
(201)262-3344
520 Route 17 North
Paramus, NJ
The Home Depot
(914)593-7110
1 Saw Mill River Road
Hawthorne, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 27, 2007

By Michael Springer

Photos by dotfordot.com

When you think of chainsaws in construction work, your mind usually goes to builders of log homes, pole barns, docks, fences, and perhaps timber framers. But I dug a little deeper and found them used in demolition, vintage wood salvage and reuse, panel home building, sculptural stair and railing making, woodcarving, and even in general framing and roofing operations.

In my survey of uses, perhaps the best framing trick is to use a chainsaw for cutting out window and door openings. Especially on thick walls where it is hard to cut straight with a long blade on a recip saw, guiding a chainsaw's bar along the framing will ensure a flush cut. Just be sure there are no protruding nails.

Chainsaws' plunge-cutting abilities have them cutting quick roof vents out for some guys. Different aftermarket saw bases and accessories are available for clamping onto a chainsaw's bar for uses such as gang-cutting deep rafters at a uniform angle, square cross-cutting, making angle or compound angle cuts in timbers, and even for guiding long rip cuts.

While not known for the smoothest finish cuts, chainsaws are accurate enough for the easy cutting of large LVL and glulam ridge beams without having to flip them over. And remodelers and roofers, how many times have you cut tree branches back with the wrong saw?

Click here to read full article from Replacement Contractor

Related Articles
- How to Choose a Grout Vibrator Monsey NY
Using a puddling stick to consolidate grout is no longer acceptable in most building codes. Changing codes now require that grout pours greater than 12 inches be both consolidated and reconsolidated by mechanical vibration.
- Eco-Friendly Products Monsey NY
- Energy-Efficient Lighting Controls Monsey NY
- Electric Concrete Breakers Monsey NY