Electric Chainsaws Elmira NY

When you think of chainsaws in construction work in Elmira, your mind usually goes to builders of log homes, pole barns, docks, fences, and perhaps timber framers.

Local Companies

Fastenal- Elmira
607-737-9062
1336 College Ave Elmira, NY, 14901
Elmira, NY
Horseheads Do it center
607-739-5616
124 North Main Street
Horseheads, NY
Tom's Hardware & Feed Inc.
607-565-2736
615-617 Cayuta Avenue
Waverly, NY
The Home Depot
(607)936-1400
3160 Silverback Lane
Painted Post, NY
Horseheads - D
(607) 739-3661
1020 Center St
Horseheads, NY
Lowe's
(607) 739-6106
913 County Rd., Route 64
Elmira, NY
Lowe's of Sayre, PA
570-731-2000
2151 Elmira Street Sayre, PA, 18840
Sayre, PA
Valu Home Centers
607-936-9900
Ames Plaza 1000 Victory H
Painted Post, NY
Valu Home Centers
607-732-3200
1105 Broadway Ave
Elmira, NY
Kmart 9166 / Cross Merch
(570) 888-9613
2900 Elmira Street
Sayre, PA

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 27, 2007

By Michael Springer

Photos by dotfordot.com

When you think of chainsaws in construction work, your mind usually goes to builders of log homes, pole barns, docks, fences, and perhaps timber framers. But I dug a little deeper and found them used in demolition, vintage wood salvage and reuse, panel home building, sculptural stair and railing making, woodcarving, and even in general framing and roofing operations.

In my survey of uses, perhaps the best framing trick is to use a chainsaw for cutting out window and door openings. Especially on thick walls where it is hard to cut straight with a long blade on a recip saw, guiding a chainsaw's bar along the framing will ensure a flush cut. Just be sure there are no protruding nails.

Chainsaws' plunge-cutting abilities have them cutting quick roof vents out for some guys. Different aftermarket saw bases and accessories are available for clamping onto a chainsaw's bar for uses such as gang-cutting deep rafters at a uniform angle, square cross-cutting, making angle or compound angle cuts in timbers, and even for guiding long rip cuts.

While not known for the smoothest finish cuts, chainsaws are accurate enough for the easy cutting of large LVL and glulam ridge beams without having to flip them over. And remodelers and roofers, how many times have you cut tree branches back with the wrong saw?

Click here to read full article from Replacement Contractor

Related Articles
- How to Choose a Grout Vibrator Elmira NY
Using a puddling stick to consolidate grout is no longer acceptable in most building codes. Changing codes now require that grout pours greater than 12 inches be both consolidated and reconsolidated by mechanical vibration.
- Electric Concrete Breakers Elmira NY
- Energy-Efficient Lighting Controls Elmira NY
- Eco-Friendly Products Elmira NY