Electric Chainsaws Delmar NY

When you think of chainsaws in construction work in Delmar, your mind usually goes to builders of log homes, pole barns, docks, fences, and perhaps timber framers.

Local Companies

ABC Supply Co.,Inc/Albany
518-489-5581
15 Kairnes Street Albany, NY, 12205
Albany, NY
Lowe's of Glenville
518-952-8789
93 Freemans Bridge Rd Glenville, NY, 12302
Glenville, NY
Pfeil Hardware
518-687-0014
63 Third St
Troy, NY
Phillips Hardware
518-459-2300
42 Saratoga Ave
Waterford, NY
Lowe's
(518) 348-2940
476 Route 146
Halfmoon, NY
Tremont Lumber Co Inc
(518) 674-3836
2897 Route 43
Averill Park, NY
Lowe's of Albany
518-956-9407
1482 Central Ave Colonie, NY, 12205
Colonie, NY
LOWE'S OF HALFMOON, NY
518 348-2940
476 ROUTE 146 HALFMOON, NY, 12065
Halfmoon, NY
A. Phillips Hardware
518-765-2377
18 South Main St
Voorheesville, NY
The Home Depot
(518)348-0158
4 Halfmoon Crossing Blvd
Halfmoon, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 27, 2007

By Michael Springer

Photos by dotfordot.com

When you think of chainsaws in construction work, your mind usually goes to builders of log homes, pole barns, docks, fences, and perhaps timber framers. But I dug a little deeper and found them used in demolition, vintage wood salvage and reuse, panel home building, sculptural stair and railing making, woodcarving, and even in general framing and roofing operations.

In my survey of uses, perhaps the best framing trick is to use a chainsaw for cutting out window and door openings. Especially on thick walls where it is hard to cut straight with a long blade on a recip saw, guiding a chainsaw's bar along the framing will ensure a flush cut. Just be sure there are no protruding nails.

Chainsaws' plunge-cutting abilities have them cutting quick roof vents out for some guys. Different aftermarket saw bases and accessories are available for clamping onto a chainsaw's bar for uses such as gang-cutting deep rafters at a uniform angle, square cross-cutting, making angle or compound angle cuts in timbers, and even for guiding long rip cuts.

While not known for the smoothest finish cuts, chainsaws are accurate enough for the easy cutting of large LVL and glulam ridge beams without having to flip them over. And remodelers and roofers, how many times have you cut tree branches back with the wrong saw?

Click here to read full article from Replacement Contractor

Related Articles
- How to Choose a Grout Vibrator Delmar NY
Using a puddling stick to consolidate grout is no longer acceptable in most building codes. Changing codes now require that grout pours greater than 12 inches be both consolidated and reconsolidated by mechanical vibration.
- Energy-Efficient Lighting Controls Delmar NY
- Eco-Friendly Products Delmar NY
- Electric Concrete Breakers Delmar NY